Conductive Polymer Aluminum Solid Capacitors (RP Series) Tmce31-2
Product Description
Type: Aluminum Electrolytic Capacitor Packaging Type: Through Hole Structure: Fixed Capacitor Electrolyte: Electrolytic Packing: Bulk Specification: CE RoHS Reach Report HS Code: 8532229000 Application: General Purpose Capacitance: 270UF Manufacturing Material: Electrolytic Rated Voltage: 16VDC Trademark: TOPMAY Origin: China Conductive Polymer Aluminum Solid Capacitors (RP Series)
Scope: This specification covers polarized aluminum electrolytic capacitors with solid electrolyte for use in electronic equipment.
Reference Standard: JISC 5101-4-2 1998 Aluminum electrolytic capacitors with solid electrolyte
Capacitance Tolerance: ± 20% (120Hz, 20° C)
Operating Temperature Range: -55° C-~+105° C
Rated Voltage: 16VDC
Surge Voltage: 18.4VDC
Dissipation Factor (tan δ ): 0.12
Measurement Frequency: 120Hz. Temperature: 20° C
Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDC
Rated Voltage: 16VDC
ESR: 12mΩ
Measurement Frequency: 100~300kHz± 10%
Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDC
Temperature: 20° C± 10° C
Leakage Current: The rated voltage shall be applied between terminals of capacitor such that the terminal voltage will reach the rated voltage with in two minute and the leakage current shall be measured at following time after the voltage has reached the rated voltage across a 1000± 10Ω Series protection Resistor. Then the current value shall not be exceed value calculated from following formula.
Rated 16V/270uF LC(2 Minute) 864uA
Temperature Characteristics: Measurement Impedance at +20± 2° C, 100kHz± 20%
Measurement Impedance at -25± 2° C, 100kHz± 20%
Measurement Impedance at -55± 2° C, 100kHz± 20%
Impedance ratio of the -25° C and -55° C values to the +20° C value shall be not exceed the following values.
Z(-25° C)/Z(+20° C) 1.15
Z(-55° C)/Z(+20° C) 1.25
Endurance( Load Life Test)
Capacitors shall be applied the rated voltage continuously through 1000Ω Series protective resistor at 105± 2° C for 2000hours. After the test and returned in standard condition for 1~2 hours, and the capacitor shall meet the following requirements. Contact us if you need more details on Aluminum Solid Capacitors. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electrolytic Capacitor、Polymer Capacitor. If these products fail to match your need, please contact us and we would like to provide relevant information.
Scope: This specification covers polarized aluminum electrolytic capacitors with solid electrolyte for use in electronic equipment.
Reference Standard: JISC 5101-4-2 1998 Aluminum electrolytic capacitors with solid electrolyte
Capacitance Tolerance: ± 20% (120Hz, 20° C)
Operating Temperature Range: -55° C-~+105° C
Rated Voltage: 16VDC
Surge Voltage: 18.4VDC
Dissipation Factor (tan δ ): 0.12
Measurement Frequency: 120Hz. Temperature: 20° C
Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDC
Rated Voltage: 16VDC
ESR: 12mΩ
Measurement Frequency: 100~300kHz± 10%
Measurement Voltage (V): No more than 0.5Vrms+2.1~2.5VDC
Temperature: 20° C± 10° C
Leakage Current: The rated voltage shall be applied between terminals of capacitor such that the terminal voltage will reach the rated voltage with in two minute and the leakage current shall be measured at following time after the voltage has reached the rated voltage across a 1000± 10Ω Series protection Resistor. Then the current value shall not be exceed value calculated from following formula.
Rated 16V/270uF LC(2 Minute) 864uA
Temperature Characteristics: Measurement Impedance at +20± 2° C, 100kHz± 20%
Measurement Impedance at -25± 2° C, 100kHz± 20%
Measurement Impedance at -55± 2° C, 100kHz± 20%
Impedance ratio of the -25° C and -55° C values to the +20° C value shall be not exceed the following values.
Z(-25° C)/Z(+20° C) 1.15
Z(-55° C)/Z(+20° C) 1.25
Endurance( Load Life Test)
Capacitors shall be applied the rated voltage continuously through 1000Ω Series protective resistor at 105± 2° C for 2000hours. After the test and returned in standard condition for 1~2 hours, and the capacitor shall meet the following requirements. Contact us if you need more details on Aluminum Solid Capacitors. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electrolytic Capacitor、Polymer Capacitor. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Aluminum Electrolytic Capacitor
Premium Related Products
Other Products
Hot Products
Varistor Is a Kind of Semiconductor Ceramic Component Which Uses The Zinc Oxide10NF 250V Metallized Polyester Film Capacitor for AC, 270NF 400VMini Box 5mm Metallized Polyester Film Capacitor4.7UF 16V Radial Tantalum CapacitorSafe Film- Metallized Polypropylene Zincaluminum Film50V Ceramic Disc Capacitor (TMCC01)0.22f 5.5V C Vertical Super Capacitor---TopmaySilver Mica Capacitor Radial Type (TMCM01)500PF Ccg81 High Voltage Ceramic Capacitor50V 1UF Standard SMD Aluminum Electrolytic Capacitor (TMCE24)400V Oval Cbb20 Film CapacitorMini Box 5mm Polyester Film Capacitor250V 10000UF Screw Terminal Aluminum Electronic CapacitorHot Sale Metallized Polypropylene Film Capacitor for AC Cbb60 35UF 450VAC250V 10000UF Screw Terminal Aluminum Electronic Capacitor (TMCE21)Hot Sale Metallized Polypropylene Film Capacitor for AC Cbb60 80UF 450vacc