2200UF Aluminum Electrolytic Capacitor Tmce04

Model NO.: TMCE04 Application: General Purpose Rated Voltage Range: 6.3~450V. DC Operating Temperature: Rang-55~+125degree(6.3V~63V); -40~+125degree(80V~4 Trademark: TOPMAY & ETOPMAY Origin: China Type: Aluminum Electrolytic Capacitor Packaging Type: Through Hole Capacitance Tolerance: ± 20%(M) (25degree, 100 or 120Hz) Leakage Current: I≤ 0.02 CV or 3(Ua) (6.3V~100V) Specification: TUV, VDE, CE, UL, SA, FI, GreatWall, and etc. HS Code: 85322510 Standard Aluminum Electrolytic Capacitor 125 degree for 2000H
Standard Aluminum Electrolytic Capacitor 125 degree for 5000H
Standard Aluminum Electrolytic Capacitor 130degree for 4000H
Specifications
ItemsCharacteristics
Rated Voltage Range: 6.3~450V. DC
Operating Temperature:
Rang-55~+125degree(6.3V~63V); -40~+125degree(80V~450V)
Capacitance Tolerance: ± 20%(M) (25degree, 100 or 120Hz)
Leakage Current: I≤ 0.02 CV or 3(μ A) (6.3V~100V) I≤ 0.03 CV +10 (μ A ) (160V~450V)
Where, I: Max. Leakage current (μ A), C: Nominal capacitance(μ F), V: Rated voltage(V)(At 25degree after 2 minutes)
Dissipation Factor tanδ
Rated voltage(VdC)6.31016253550~100160~250350~450
Tanδ (Max. )0.240.200.160.140.120.100.120.15
(25degree, 100 or 120Hz)

A When nominal capacitance exceeds 1000μ F, add 0.02 to the value above for each 1000μ F increase.
Low Temperature
Characteristics
(Max. Impedance Ratio)Impedance ratio at 100Hz or 120Hz shall not exceed the values given in the below table.

Rated voltage(VdC)6.3~1625~6380~100160~250350~450
Z-40degreeZ+degree4610
Z-55degreeZ+20degree54///

When nominal capacitance exceeds 1000μ F, add 1 to the value above for each 1000μ F increase.
Shelf LifeAfter storage at 125degreefor 1000 hours, the capacitors shall meet the following requirements. (500 hours for 350V~450V)

Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ 500% of the initial specified value
Load LifeAfter application of rated voltage with rated ripple current for the 2000hours at +125degree, the capacitors shall meet the following limits.

Capacitance Change≤ ± 20% of the initial value
D. F. ( tanδ )≤ 200% of the initial specified value
Leakage Current≤ The Initial specified value
OthersMeet Q/RME 40-2008, GB/T 5993-2003

Contact us if you need more details on Capacitor. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminum Electrolytic Capacitor、125c 2000h Capacitor. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aluminum Electrolytic Capacitor